Drag the lines on the photo to frame your opening. Watch the animation below to see how it works.
Tap to hear how the line tool works
🎬How to use the line tool
Green lines = edges of your opening · Orange lines = dividers between shutters. Drag each line into position on the photo below.
📐 Drag the lines to match your storefront
● Green lines = all 4 edges of your opening — drag left/right edges to the sides, drag top/bottom edges to the frame. ● Orange lines = dividers between shutters — drag to position.
1 shutter section
Drag lines to position — tap Done Dragging when ready
✅ Layout Locked
Measure each section using the arrows shown — width per shutter and total height.
📏 Frame Your Opening
Drag all four green lines to frame the opening you want covered.
Drag top, bottom, left & right green lines to match your opening
✅ Frame Locked
Measure the arrows on your storefront — write down the width and height shown.
⚠️ Go back and upload your storefront photo first to use the layout tool.
Step 4
Enter Your Measurements
Now go measure each shutter opening. Enter the width and height for each one. Measure inside the frame in inches.
If we have any questions about your measurements, what's the best way to follow up?
💬Text
📞Call
✉️Email
Best time to reach you (optional)
Morning · 8–11 AM
Midday · 11–2 PM
Afternoon · 2–5 PM
We'll email your quote here — that's the only reason we ask.
Phone or email — at least one is needed so we can reach you.
🔒 Your phone number and email are never shared with any third party. We are the only ones who will contact you — and only if needed regarding your estimate.
🎨 Color Samples
Note: Colors shown in this app are for reference only and may not match actual material finishes. Sheen, texture, and lighting can affect appearance. We strongly recommend requesting physical samples before deciding.
Send an installer to measure & bring samples
Have a professional visit the site with samples and take precise measurements.
Send color samples with my proposal
Include physical color chips with your quote so I can compare finishes in person.
📸 Your Layout with Measurements
Your shutter sections with the measurements you entered
Review Your Submission
Something went wrong sending your submission. Please try again or call us at (707) 840-3435.
Sending your measurements…
📋 Estimate Disclaimer: The quote we send is based on your submitted measurements. All estimates are not final until an installer completes a site visit and verifies the measurements in person. Final cost is subject to change after field measurement.
🎉
You're all set!
Thank you for sending your measurements. We'll review everything and be in touch soon.
What happens next
1
We review your measurements and photos — usually within 1 business day.
2
We send a personalized estimate based on your measurements. Note: the estimate is not final until an installer verifies measurements on-site — final cost may change.
Read your tape to the nearest 1/8" — find your fraction below, then enter the decimal in the form. Watch the width & height fill in.
Tutorial 2 of 5
Step outside and take a photo of your whole storefront — stand far enough back that the entire building face fits in the frame.
Tutorial 3 of 5
The green lines mark the left and right edges of your storefront — where the first shutter starts and the last shutter ends. Each orange line marks the edge between two shutters. Drag it to position each shutter section.
Tutorial 4 of 5
Two windows side by side? Measure from the inner edge of the outer frame on one side all the way to the other. One shutter covers both openings.
Tutorial 5 of 5
You're done! Hit Submit and we will review your measurements and get back to you with a quote.
